MORI SEIKI NZ 2000 T3 Y3
Provider
IMZ Maschinen Vertriebs GmbH
Marie-Curie-Straße 19
D-73525 Schwäbisch Gmünd
Telephone: +49 (0)7171 98713-0
Telefax: +49 (0)7171 98713-29
E-Mail: info@imz.de
Internet: www.imz.de
To contact
Details
| Stock number |
1075-13597 |
| Machine type |
CNC Turning- and Milling Center |
| Brand |
MORI SEIKI |
| Type |
NZ 2000 T3 Y3 |
| Built |
2011 |
| Control mode |
CNC |
| Stock location |
Standort |
| Country of origin |
Japan |
| Delivery time |
to be agreed |
| Freight |
ex site |
| Price |
0.00 EUR |
Technical details
| turning diameter |
max. 320 mm |
| turning length |
max. 810 mm |
| Control |
MSX 701 IV / MAPPS IV |
| greates pass round over bed |
800 mm |
| Swing dia. over traverse guideway |
800 mm |
| distance between spindles |
1.130 mm |
| standard turning dia. |
200 mm |
| Main spindle: |
|
| turning speeds |
max. 5.000 min/-1 |
| power capacity - main spindel |
25 / 22 kW |
| max. Torque |
358 Nm |
| spindle diameter in front bearing |
120 mm |
| spindle bore |
73 mm |
| Bar feed |
max. 65 mm |
| C-Axis |
0,001 ° |
| spindle nose |
JIS A2-6 |
| Subspindle: |
|
| power capacity - Sub spindle |
25 / 22 kW |
| chucking diameter |
210 mm |
| Turret 1: |
|
| number of toolpositions |
16 pos. |
| Number of driven toolspositions |
16 pos. |
| Spindle speed - driven tool stations |
max. 6.000 min -1 |
| power capacity - driven tool-stations |
7,5 / 5,5 kW |
| Y - Axis |
110 (+65 / -45) mm |
| Shank diameter |
20 x 20 mm |
| Drill shank diameter |
32 mm |
| turret change time |
0,18 sec. |
| Turret 2: |
|
| Turret 3: |
|
| axis stroke: |
|
| x-travel |
1/2/3: 210 mm |
| y-travel |
1/2/3: 110 mm |
| z-travel |
1: 300 (+100) mm |
| Traverses Subspindle |
920 mm |
| feeds: |
|
| rapid traverse ( X / Y / Z ) |
1: 30 / 20 / 50 m/min |
| Tipp feed |
0 - 5.000 mm/min |
| total power requirement |
102 kVA |
| weight of the machine ca. |
9,5 t |
| dimensions of the machine ca. |
15,5 x 5,5 x 4,0 m |
Accessories
| Documents |
|
| Chip conveyor |
|
| Coolantsystem |
|
| high pressure coolant |
Knoll KF200/1400 70 bar |
| triple signal light |
|
| C-axis |
|
| Y-axis |
|
| Subspindle |
|
| Turret |
3x |
| gantry loader |
Promot EPL20 NC |
| paper band filter |
|
| tool holders |
|
| driven tools |
|
| tool setter |
2x |
| steady rest |
SMW - SLU-1Z (on Turret) |
| exhaust fan |
ELBARON - EBR 5000 D |
Additional information
CNC - Turning- and MillingCenter
MORI SEIKI - NZ 2000 T3 Y3
- Main- and Subspindle
- 3 turrets, 2 upper, 1 below
- 3 Y-Axis
- 3x 16 driven tool stations
- only 9.443 operating hours
